Filmtec XLE-440 Element – Progressive Water Treatment
Menu
Cart 0
Filmtec XLE-440 Element

Filmtec XLE-440 Element

  • $ 645.00



Dow® Filmtec™ SW30XLE-440 offers medium salinity and medium temperature feed waters an advanced combination of high productivity and high rejection through extra-low energy consumption and single-pass design. It is also an ideal choice for two- pass seawater designs or high salinity brackish water applications. The combination of high active area and thick feed spacer of the Dow Filmtec membranes results in higher productivity and lower cleaning frequency which enable sustainable lower lifecycle cost.

SPECIFICATIONS:

  • Model Number: Filmtec SW30XLE-440
  • Diameter: 8"
  • Length: 40"
  • Weight: 40 lbs
  • Active Membrane: 440 ft2
  • Membrane Type: Polyamide Thin Film Composite
  • Outer Shell: Hard Fiberglass
  • Applied Pressure: 800 PSI
  • Nominal Capacity: 9900 GPD
  • Maximum Pressure: 1200 PSI
  • Stabilized Salt Rejection: 99.75%
  • Stabilized boron rejection: 88%

APPLICATION DATA:

  • 28 mil Feed Spacer
  • Maximum Operating Temperature: 113°F (45°C)
  • Chlorine Tolerance: <0.1 PPM
  • Maximum Feed Flow Rate: 85 GPM
  • Maximum Pressure Drop: 15 PSI
  • pH Range, Continuous Operation: 2-11
  • pH Range, Short Term Cleaning (30min): 1-13

TEST CONDITIONS:

  • Applied Pressure: 800 PSIG (5.5 MPa)
  • 77°F (25°C) Operating Temperature
  • 8% Permeate Recovery

FEATURES:

  • For use in seawater desalination, municipal drinking water, and industrial desalination
  • High flux reduces energy use or pressure required
  • Good rejection results in good quality water
  • Deliver high performance over the operating lifetime without the use of oxidative post-treatments like many competitive products
  • Automated, precision fabrication with a greater number of shorter membrane leaves reduces the effect of overall fouling and maximizes element efficiency, lowering your cost of operation
  • Includes iLEC™ interlocking endcaps, which reduce system operating costs and the risk of o-ring leaks that can cause poor water quality
  • Filmtec performance and quality

We Also Recommend